Hydraulic auger drive – “Digga” PD4HF
Propelling machinery tonnage (t): 5 – 10
Recommended oil flow (min. – max. l/min): 50 – 150
Maximum power (kW): 60
Recommended pressure (bar): 175 – 240
Drive weight (kg): 149
Speed (rpm): 43 – 128
Torque (theoretical) (Nm): 4495
Description
IMPORTANT!
When choosing hydraulic earth auger drive, it is important to pay attention to parameters marked in red.
If you want to know more, click on hydraulic auger drive model.
MODELS | Propelling machinery tonnage (t) | Oil flow (Min-Max l/min) | Power (kW) | Maximum pressure (bars) | Drive weight (kg) | Speed (rpm) | Maximum torque (Nm) |
PDD | 0,75 – 4,5 | 15 – 45 | 25 | 125 – 240 | 41 | 49 – 148 | 1197 |
PDX | 0,75 – 4,5 | 20 – 50 | 25 | 125 – 240 | 45 | 44 – 110 | 1743 |
PDX2 | 0,75 – 4,5 | 30 – 50 | 25 | 125 – 240 | 45 | 41 – 83 | 2331 |
PDX3 | 0,75 – 4,5 | 30 – 55 | 25 | 125 – 240 | 45 | 41 – 74 | 2850 |
PD 3 | 0,75 – 4,5 | 45 – 75 | 25 | 175 – 240 | 57 | 43 – 81 | 3591 |
PD 4 | 0,75 – 4,5 | 50 – 85 | 25 | 175 – 240 | 58 | 43 – 73 | 4473 |
PD 5 | 5 – 10 | 60 – 90 | 25 | 175 – 240 | 67 | 41 – 70 | 5166 |
PD 6 | 5 – 10 | 70 – 115 | 25 | 175 – 240 | 89 | 48 – 79 | 5607 |
PD 7 | 5 – 10 | 75 – 115 | 25 | 175 – 240 | 90 | 47 – 73 | 6048 |
PD 8 | 5 – 10 | 80 – 115 | 25 | 175 – 240 | 107 | 44 – 63 | 7056 |
PD 10 | 5 – 10 | 85 – 115 | 25 | 175 – 240 | 110 | 38 – 52 | 8568 |
PD4HF | 5 – 10 | 50 – 150 | 60 | 175 – 240 | 149 | 43 – 128 | 4495 |
PD6HF | 5 – 10 | 60 – 150 | 60 | 175 – 240 | 149 | 41 – 102 | 5670 |
PD8HF | 5 – 10 | 80 – 200 | 60 | 175 – 240 | 149 | 43 – 107 | 7175 |
PD10HF | 5 – 10 | 100 – 200 | 60 | 175 – 240 | 149 | 39 – 79 | 9765 |
PD 12 | 10 – 20 | 110 – 230 | 60 | 175 – 240 | 149 | 41 – 78 | 11340 |
PD 15 | 10 – 20 | 125 – 230 | 60 | 240 | 176 | 33 – 63 | 13911 |
PD 18 | 10 – 20 | 130 – 230 | 60 | 240 | 176 | 26 – 50 | 17620 |
PD 22 | 10 – 20 | 140 – 230 | 60 | 240 | 176 | 21 – 40 | 22257 |
PD 25 | 20 – 50 | 140 – 230 | 60 | 240 | 300 | 17 – 33 | 25956 |
PD 30 | 20 – 50 | 140 – 230 | 60 | 240 | 300 | 15 – 29 | 30492 |
PD 40 | 20 – 50 | 150 – 230 | 60 | 240 | 300 | 14 – 27 | 32886 |
PD 50 | 20 – 50 | 150 – 230 | 60 | 240 | 300 | 12 – 23 | 38619 |
Backhoe – High Flow
Digga’s PD4HF to PD10HF range of drilling auger drive units are ideally suited for backhoes with a flow between 50 to 200 lpm. Fitted with Digga / Eaton bell motors with integrated pressure relief valve and input housing. Innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary auger drives are specially designed for drilling and augering in most ground conditions.
- Compact high torque Digga manufactured gearbox
- Highly efficient design with less moving parts
- Fitted with Eaton/Digga geroler hydraulic motor
- Full range of shafts available upon request
- Extreme duty shaft locking system
- Drive fits down the hole for greater digging depth
- Low maintenance with 5yr gear box and 3yr motor warranty
Features & Benefits
- Ability To Add Swing Control
- Top Mounted Hose Ports
- PRV Included
- Cutting Edge Design
- 2 Piece Shaft Design
- Ability To Add Diggalign
- Integrated Motor & Output
- Eaton Motor
- Australian Made
- True Warranty
- Lifetime Shaft Pull Out Warranty
SPECIFICATION | PD4HF | PD6HF | PD8HF | PD10HF |
Rec Flow Range | 50-150 lpm | 60-150 lpm | 80-200 lpm | 100-200 lpm |
Max Torque | 4473 Nm | 5634 Nm | 7136 Nm | 9690 Nm |
Motor | 6K Bell EATON | 6K Bell EATON | 6K Bell EATON | 6K Bell EATON |
Pressure Valve Fitted | Included | Included | Included | Included |
Energy Control Valve | Optional | Optional | Optional | Optional |
Case Drain Required | Case drain recommended for backhoe loaders. Not required for excavators. |
|||
Max Pressure – Do not exceed | 240 bar @ 130 lpm | |||
Max Flow – Do not exceed | 170 lpm @ 180 bar | 210 lpm @ 145 bar | 230 lpm @ 130 bar | 230 lpm @ 130 bar |
Max Power – Do not exceed | 50 Kw (67 hp) | |||
Overall Length | 950 mm | 950 mm | 950 mm | 950 mm |
Diameter | 290 mm | 290 mm | 290 mm | 290 mm |
Weight – no frame / hitch | 125 Kg | 149 Kg | 149 Kg | 149 Kg |
Std Output Shaft | 75 mm Square | 75 mm Square | 75 mm Square | 75 mm Square |
Swing Control | Optional | Optional | Optional | Optional |
Diggalign | Optional | Optional | Optional | Optional |
Rec Auger | 6 Series | 6 Series | 6 Series | 8 Series |
Max Auger Dia Clay / Shale | 750 mm | 900 mm | 1000 mm | 1000 mm |
Max Auger Dia Earth | 1000 mm | 1200 mm | 1200 mm | 1500 mm |
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.