Hydraulic auger drive – “Digga” PD30
Propelling machinery tonnage (t): 20 – 50
Recommended oil flow (min. – max. l/min): 140 – 230
Maximum power (kW): 60
Recommended pressure (bar): 240
Drive weight (kg): 300
Speed (rpm): 15 – 29
Torque (theoretical) (Nm): 30492
Description
IMPORTANT!
When choosing hydraulic earth auger drive, it is important to pay attention to parameters marked in red.
If you want to know more, click on hydraulic auger drive model.
MODELS | Propelling machinery tonnage (t) | Oil flow (Min-Max l/min) | Power (kW) | Maximum pressure (bars) | Drive weight (kg) | Speed (rpm) | Maximum torque (Nm) |
PDD | 0,75 – 4,5 | 15 – 45 | 25 | 125 – 240 | 41 | 49 – 148 | 1197 |
PDX | 0,75 – 4,5 | 20 – 50 | 25 | 125 – 240 | 45 | 44 – 110 | 1743 |
PDX2 | 0,75 – 4,5 | 30 – 50 | 25 | 125 – 240 | 45 | 41 – 83 | 2331 |
PDX3 | 0,75 – 4,5 | 30 – 55 | 25 | 125 – 240 | 45 | 41 – 74 | 2850 |
PD 3 | 0,75 – 4,5 | 45 – 75 | 25 | 175 – 240 | 57 | 43 – 81 | 3591 |
PD 4 | 0,75 – 4,5 | 50 – 85 | 25 | 175 – 240 | 58 | 43 – 73 | 4473 |
PD 5 | 5 – 10 | 60 – 90 | 25 | 175 – 240 | 67 | 41 – 70 | 5166 |
PD 6 | 5 – 10 | 70 – 115 | 25 | 175 – 240 | 89 | 48 – 79 | 5607 |
PD 7 | 5 – 10 | 75 – 115 | 25 | 175 – 240 | 90 | 47 – 73 | 6048 |
PD 8 | 5 – 10 | 80 – 115 | 25 | 175 – 240 | 107 | 44 – 63 | 7056 |
PD 10 | 5 – 10 | 85 – 115 | 25 | 175 – 240 | 110 | 38 – 52 | 8568 |
PD4HF | 5 – 10 | 50 – 150 | 60 | 175 – 240 | 149 | 43 – 128 | 4495 |
PD6HF | 5 – 10 | 60 – 150 | 60 | 175 – 240 | 149 | 41 – 102 | 5670 |
PD8HF | 5 – 10 | 80 – 200 | 60 | 175 – 240 | 149 | 43 – 107 | 7175 |
PD10HF | 5 – 10 | 100 – 200 | 60 | 175 – 240 | 149 | 39 – 79 | 9765 |
PD 12 | 10 – 20 | 110 – 230 | 60 | 175 – 240 | 149 | 41 – 78 | 11340 |
PD 15 | 10 – 20 | 125 – 230 | 60 | 240 | 176 | 33 – 63 | 13911 |
PD 18 | 10 – 20 | 130 – 230 | 60 | 240 | 176 | 26 – 50 | 17620 |
PD 22 | 10 – 20 | 140 – 230 | 60 | 240 | 176 | 21 – 40 | 22257 |
PD 25 | 20 – 50 | 140 – 230 | 60 | 240 | 300 | 17 – 33 | 25956 |
PD 30 | 20 – 50 | 140 – 230 | 60 | 240 | 300 | 15 – 29 | 30492 |
PD 40 | 20 – 50 | 150 – 230 | 60 | 240 | 300 | 14 – 27 | 32886 |
PD 50 | 20 – 50 | 150 – 230 | 60 | 240 | 300 | 12 – 23 | 38619 |
Excavator 20T – 50T
Digga’s PD25 to PD50 range of drilling auger drives are ideally suited for 20 to 50t excavators with a flow between 70 to 230 lpm. Fitted with Digga / Eaton bell motors with intergrated pressure relief valve and input housing. An innovative design allows the gearbox to go down the hole to maximise drilling depth without extentions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary auger drilling drives are specially designed for drilling and augering in most ground conditions.
- Compact high torque Digga manufactured gearbox
- Highly efficient design with less moving parts
- Fitted with Eaton/Digga geroler hydraulic motor
- No case drain required
- Full range of shafts available upon request
- Extreme duty shaft locking system
- Drive fits down the hole for greater digging depth
- Low maintenance with 5yr gear box and 3yr motor warranty
Features & Benefits
- Compatible with Swing Control – SCS
- Pressure Relief Valve included
- Cutting Edge Design
- 2-Piece Shaft Design
- Lifetime Shaft Pull-out Warranty
- Compatible with Diggalign
- Integrated Motor & Output
- Eaton Motor
- Australian Made
- True Warranty
SPECIFICATION | PD25 | PD30 | PD40 | PD50 | |
Rec Flow Range | 120-230 lpm | 120-230 lpm | 120-230 lpm | 120-230 lpm | |
Max Torque | 26267 Nm | 30543 Nm | 33041 Nm | 38420 Nm | |
Motor | 6K Bell EATON | 6K Bell EATON | 6K Bell EATON | 6K Bell EATON | |
Pressure Valve Fitted | Included | Included | Included | Included | |
Energy Control Valve | Optional | Optional | Optional | Optional | |
Case Drain Required | No | No | No | No | |
Max Pressure | Do not exceed 240 bar @ 130 lpm | ||||
Max Flow | Do not exceed 230 lpm @ 130 bar | ||||
Max Power | Do not exceed 50 Kw (67 hp) | ||||
Overall Length | 1152 mm | 1152 mm | 1152 mm | 1152 mm | |
Diameter | 355 mm | 355 mm | 355 mm | 355 mm | |
Weight (no frame / hitch) | 300 Kg | 300 Kg | 300 Kg | 300 Kg | |
Std Output Shaft | 100 mm Square | 100 mm Square | 100 mm Square | 100 mm Square | |
Swing Control | Optional | Optional | Optional | Optional | |
Diggalign | Optional | Optional | Optional | Optional | |
Rec Auger | 10 / 11 Series | 10 / 11 Series | 10 / 11 Series | 10 / 11 Series | |
Max Auger Dia Clay / Shale | 1200 mm | 1200 mm | 1500 mm | 1500 mm | |
Max Auger Dia Earth | 1600 mm | 1600 mm | 1800 mm | 1800 mm |
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.